These hydraulic cylinders on studs were ordered from us by our regular customer, a manufacturer of components for motor vehicles. The hydraulic cylinders as part of the equipment will go to the end customer, a major automotive company, where they will be used in a bending machine to produce anti-roll bars.
The hydraulic cylinders shown have a special feature – damping on both sides. Damping reduces the dynamic load on components by reducing the cylinder speed in the last segment of the stroke.
Rod force at 160 bar working pressure: 5 t extension, 3.4 t retraction. Piston diameter 63 mm, rod diameter 36 mm, stroke 100 mm and 150 mm. Stem mounting – male thread, sleeve mounting – eye.
The hydraulic cylinders shown have a special feature – damping on both sides. Damping reduces the dynamic load on components by reducing the cylinder speed in the last segment of the stroke.
Rod force at 160 bar working pressure: 5 t extension, 3.4 t retraction. Piston diameter 63 mm, rod diameter 36 mm, stroke 100 mm and 150 mm. Stem mounting – male thread, sleeve mounting – eye.
